Configuring/Updating a Port
- Navigate to Networks and select the port that you wish to configure.
- Port Settings
- Port- The port number that is being configured.
- MTU- 9000 for 10G and 1500 for 1G
- DHCP- Enable if the IP Address is not being set statically.
- IP Address- Default is 172.27.port.250 where port is the number that was set earlier. For example setting up Port 2 would give us 172.27.2.250
- Subnet Mask- Default is 255.255.255.0
- Select
to save the settings.